top of page




  • R-MOLD mold release ceramic coating spray is a product specially formulated for easy separation of metal castings whose melting temperature does not exceed 1200 °C from the mold.

    Molten metal does not stick to molds coated with R-MOLD, it is separated easily and without damage. It is suitable for casting metals such as Gold-Silver-Aluminium.

    Before using R-MOLD spray, the mold surface must be thoroughly cleaned of oil and dirt, keep the spray can in a horizontal or vertical form, shake it well, then spray it to form a very thin layer by moving your hand to the right and left without piling it on a fixed point from a distance of 10-15 cm, thick coating films cause surface irregularities.

    The spraying distance should be adjusted according to the summer and winter air temperature, spray closer to the mold in hot weather and a little further in cold weather, the coating film dries in 30-60 seconds at ambient temperature. After use, keep the aerosol tube upside down, press the button for 1-2 seconds and clean the nozzle, thus preventing the nozzle from clogging.


    Ventilate the used areas thoroughly, do not breathe spray vapors, avoid contact with the face and eyes, in case of eye contact, rinse the eyes with clean water and consult a doctor. The box is pressurized, do not open it forcibly, do not puncture the box and do not burn it, do not leave it under direct sunlight for a long time, store in cool and dry areas below 50 C, keep away from children.

bottom of page